Step 02 · Station 1

Investigating water quality

A hot spring is only useful, and only safe, if its water can be measured. At this station you record what the tests show — and then argue what the numbers mean for people, for wildlife and for the park.

  1. 1Observe the water-quality testing demonstration and listen to your teacher's instructions.
  2. 2Record the water-quality indicators tested and the readings obtained by your group.
  3. 3Fill in the observation notes, then answer the two questions at the end of the station.

The indicators

What each test tells you

Your group will test three indicators. Record the reading you obtain, then explain what that reading suggests — a number on its own is not an assessment.

Temperature

The spring emerges at about 70°C. Water this hot will scald skin and cannot support the aquatic life of a normal stream.

Temperature reading

°C

What does the reading suggest about the water quality here?

pH level

pH 7 is neutral. Most natural fresh water sits between 6.5 and 8.5; this water is slightly alkaline because of minerals dissolved at depth.

pH level reading

What does the reading suggest about the water quality here?

Dissolved oxygen

Warm water holds less oxygen than cold water. Most aquatic animals need roughly 5 mg/L or more.

Dissolved oxygen reading

mg/L

What does the reading suggest about the water quality here?

Other observations

Beyond the meters

Colour

Smell

Any other observations

Write it up

Two questions to answer

Q(a) · Why is it useful to measure water-quality indicators at a hot spring?

Q(b) · From your recording of the different water indicators and observations, write a short report on the water quality and its suitability for human consumption, biodiversity and other impacts it may have on the environment.